AQURON 2000 + PORE-BLOCKING PRIMER for AS1884:2021
AQURON 2000 and FLOOREVERDRI primer to provide a fully AS1884:2021 compliant system where required.
After FLOOREVERDRI Primer is a applied, a 3mm layer of FLC is required to provide “absorbency” for Adhesives to cure.
Prior to installing floor coverings.
CONCRETE CURING & MOISTURE CONTROL.
REQUEST A QUOTE for a AQURON 2000 + PORE BLOCKING PRIMER
- CONCRETE CURING SLAB
- MOISTURE CONTROL SYSTEM complies to AS1884:2021
Why use AQURON 2000 + PORE-BLOCKING PRIMER for AS1884:2021?
AQURON 2000 + PORE-BLOCKING PRIMER for AS1884:2021 is a two step system of internal moisture control plus a surface primer, designed to comply with AS 1884:2021.
AQURON 2000 + PORE-BLOCKING PRIMER for AS1884:2021
- Eliminate the risk of delamination caused by moisture migration.
- Code compliant moisture control system so you have peace of mind and the ability to deliver for your clients.
- MARKHAM is both the product supplier, and installer of the system.
NOTE: After FLOOREVERDRI Primer is a applied, a 3mm layer of FLC is required to provide “absorbency” for Adhesives to cure.
Prior to installing floor coverings.
CONCRETE CURING & MOISTURE CONTROL.
AQURON 2000 + PORE-BLOCKING PRIMER for AS1884:2021
Performance Based Warranty
Years of experience in curing, sealing, moisture control and protecting new concrete has proven there is a better way. No need to rely on time-consuming processes, multi-trade installations, and escalating costs at the wrong end of the project. Rather, completely effective and quality treatments from day one, to ensure an optimum slab, a warranted result, a long-lasting performance and a finish you can trust to install floor coverings on.
MARKHAM floor treatments have been trusted and proven in the field for over 25 years – a track record you can BE SURE of.BE SURE – One company, one warranty, one installer for curing, sealing and moisture barrier.
- Cost effective. Ensuring the right process from day one results in huge decreases in program time and back end costs.
NOTE: After FLOOREVERDRI Primer is a applied, a 3mm layer of FLC is required to provide “absorbency” for Adhesives to cure.
Prior to installing floor coverings.
CONCRETE CURING & MOISTURE CONTROL.
AQURON 2000 + PORE-BLOCKING PRIMER for AS1884:2021
Long term durability
- Both the concrete surface and internal matrix are protected to extend service life.
- Flexible options. Suits all slab designs and all adhesives and subsequent flooring systems that are formulated for the use on concrete.
- Compatibility guaranteed.
NOTE: After FLOOREVERDRI Primer is a applied, a 3mm layer of FLC is required to provide “absorbency” for Adhesives to cure.
Prior to installing floor coverings.
CONCRETE CURING & MOISTURE CONTROL.
Suitable for all direct-stick resilient flooring on concrete slabs, including vinyl, rubber and sports flooring.
AQURON 2000 + POREBLOCKING PRIMER is a systematic approach to concrete slab curing and moisture control.
Combining the benefits of MARKHAM’s colloidal silica hydrogel treatments with advanced knowledge of concrete and construction, this is a holistic approach to curing your slab, sealing your slab and enhancing your slab, compiled into a single readily specifiable package.
Why not view our on-demand webinar: "Hygiene and Anti-Contamination in Concrete Floor Slabs".
AQURON 2000 + PORE-BLOCKING PRIMER for AS1884:2021
CONCRETE FLOOR SLABS dry very slowly!
CONCRETE FLOOR SLABS dry very slowly!
As international “rule of thumb” concrete dries at the rate of 25mm per month.
This is not only from the time of pour, but from the time the concrete was last wet!
e.g. if it has been exposed to rainy weather during construction.
This means the concrete may still have a high moisture content at the time of installing floor coverings. This in turn can lead to delamination, bubbling, or failure of the adhesive.
MARKHAM’s solution for this challenge is to block the porosity of the concrete, immobilising the moisture. It is important to understand that the moisture is not removed, but it cannot move about and cause issues under the flooring.
Prior to installing floor coverings.
CONCRETE CURING & MOISTURE CONTROL.
AQURON 2000 + PORE-BLOCKING PRIMER for AS1884:2021
RELATIVE HUMIDITY in CONTROLLED inside concrete. NOT removed
MARKHAM catalytic silica hydrogel treatments control moisture inside the concrete porosity. They do not remove moisture. Therefore, the treated
concrete will have a measurable Relative Humidity (RH), regardless of the type of moisture test used.
Hydrogel moisture control is guaranteed regardless of measurable % RH in the concrete providing the MARKHAM FLOORING INSTALLATION GUIDE “5
Rules & 8 Precautions” are followed.
Prior to installing floor coverings.
CONCRETE CURING & MOISTURE CONTROL.
AQURON 2000 + PORE-BLOCKING PRIMER for AS1884:2021
two step system
AQURON 2000 & MARKHAM FLOORING PERFORMANCE WARRANTY Conditions
AQURON 2000 + PORE-BLOCKING PRIMER for AS1884:2021 concrete floor covering protection is the MARKHAM designed and installed system for commercial concrete slabs that will have resilient and direct stick floor coverings installed. Focused on achieving maximum service life and minimal programme disruption.
AQURON 2000 + PORE-BLOCKING PRIMER for AS1884:2021 is a 2-step systematic approach to concrete slab curing and moisture control. Combining the benefits of MARKHAM’s colloidal silica hydrogel treatments with advanced knowledge of concrete and construction, this is a holistic approach to curing your slab, sealing your slab and enhancing your slab, compiled into a single readily specifiable package.
- E96 Certified to ensure compliance with flooring standard AS 1884:2021, when primer is used in conjunction with penetrating moisture barrier.
- Trusted and proven in the field for over 25 years.
- Supplied, installed and warranted by one provider.
Hydrogel moisture control is guaranteed regardless of measurable % RH in the concrete providing the MARKHAM FLOORING INSTALLATION GUIDE “5
Rules & 8 Precautions” are followed.
Prior to installing floor coverings.
CONCRETE CURING & MOISTURE CONTROL.
AQURON 2000 + PORE-BLOCKING PRIMER for AS1884:2021 Details.
MARKHAM offer AQURON 2000 + PORE BLOCKING PRIMER by one of following options:
- PRODUCT SUPPLY 20L or 1000L with Limited Product warranty
- PROJECT SUPPLY based on total m2’s, training & Warranty Options
- TECT SYSTEMS Supply, installed with Performance Warranty
MARKHAM WARRANTY is conditional on the 5 Rules & 8 Precautions.
REQUEST A QUOTE for a AQURON 2000 + PORE BLOCKING PRIMER
NEED MORE
PRODUCT INFO?
All the details you need – download a PDF copy of the product information sheet.
Do you have a project to quote?
Or need some help specifying our products? Let us know the details of your next project and we’ll get in touch.