MAKE BURNISHED FLOORS LAST.
MARKHAM end-to-end Design, Supply & Install Products with Performance Warranty
WHAT IS SLAB-TECT®?
SLAB-TECT® for large-format burnished EXPOSED FLOORS
SLAB-TECT® is the concrete protection system used when MARKHAM is engaged to provide a end-result and performance warranty. This was previously our Supply & apply service.
SLAB-TECT® is a SYSTEM providing initial Curing & long-term Durability for new burnished concrete slabs focused toward WAREHOUSE & BULK RETAIL floors.
- SLAB-TECT® includes Design, Supply, Installation, QA & Performance Warranty
- SLAB-TECT® is project specific & a multi-product system
- SLAB-TECT® utilises products from both our CONQOR and AQURON Product range
- SLAB-TECT® is cost-effective for large format concrete pours
- SLAB-TECT® is NOT supply only of product, it is an end-to-end service.
- FLOOR SLAB SYSTEM. for burnished
- CURE, SEAL AND PERMANENTLY PROTECT
Why SLAB-TECT®?
Easy to design and detail.
Easy to construct and control.
Reduce your risk with MARKHAM’s end-to-end service.
Learn more with our on-demand webinar - "SLAB-TECT: What is it, and why?"
SLAB-TECT®
PROJECT Specific SPECIFICATION.
• Asset owners looking for long term, trouble-free, property management.
• Developers looking for a consistent look and performance, for maximum yield.
• Architects looking for a comprehensive and consistent approach to concrete performance.
• Engineers looking for long term slab durability, and effective methods that do not reduce the performance of concrete.
• Construction teams looking to achieve a consistent result and handover a first rate slab on their projects.
PROTECT FROM DAILY WEAR.
Make Burnished Floors Last.
SLAB-TECT®
Cost-effective for Large Burnished SLABS.
• Ensuring the right process from day one results in huge decreases in ongoing building maintenance.
• Flexible options. Suits all slab designs and building methods, ensuring consistency across your projects.
• The final finish – Reduced trades as this system is the final sealed, anti-dusting finish for your Warehouse & Bulk Retail floors.
PROTECT FROM DAILY WEAR.
Make Burnished Floors Last.
SLAB-TECT®
End-to-End Service
SLAB-TECT® includes supply, installation, QA & Performance Guarantee.
• MARKHAM works with all stakeholders, assisting with design, and managing application and quality control.
This allows us to issue unique performance-based warranties.
• Long-term durability – concrete surface and internal matrix are protected to extend service life of Warehouse & Bulk Retail burnished concrete floors.
PROTECT FROM DAILY WEAR.
Make Burnished Floors Last.
SLAB-TECT® process.
All system components are supplied, installed, quality controlled and managed by MARKHAM. You can be sure of a quality result that is managed by one provider, one party to work with one consistent result.
SLAB-TECT®
STEP 1 : CONCRETE CURING
OPTIONS for CURING:
• Reduced drying shrinkage cracking
• Improved long-term durability
• Increasing abrasion resistance
• Maximise concrete strength & performance
RECOMMENDED : Spray-On Hydrogel Curing & Durability within 24hrs of pour.
OPTIONAL : Spray-On Hydrogel Curing + 7 days single-use curing blanket
OPTIONAL : Single-use curing blanket only for 7 days
PROTECT FROM DAILY WEAR.
Make Burnished Floors Last.
SLAB-TECT®
STEP 2 : INTERNAL CONCRETE PROTECTION
ADVANCED COLLOIDAL SILICA HYDROGEL
PENETRATING TREATMENT
• Seal and densify the entire slab – up to 150mm deep
• Increase resistance to moisture migration
• Increase durability for long term performance
• Fully compatible – less preparation for subsequent finishes
RECOMMENDED : Spray-On Hydrogel Applied As part of curing (STEP 1)
OPTIONAL : After 7 days watercuring, burnished sample is Scrubbed & Spray-On Hydrogel Applied
PROTECT FROM DAILY WEAR.
Make Burnished Floors Last.
SLAB-TECT®
OPTONAL : SLAB SURFACE ENHANCING
LONG LASTING POLISH SYSTEM
• Creates a permanent seal to the concrete surface
• Enhance the presentation and sheen of the slab
• Reduces the time to keep clean
• Easy and quick to install
• Rejuvenates with dry buffing
OPTION 1 : Scrubbing with Pads + CONQOR CRETEPOLISH
OPTION 2 : Scrubbing with Diamond Pads to a SHEEN + CONQOR CRETEPOLISH
PROTECT FROM DAILY WEAR.
Make Burnished Floors Last.
Previous SLAB-TECT® projects.
Ideal for large footprint exposed concrete floors
SLAB-TECT® Details.
END-TO-END SERVICE
SLAB-TECT® includes Design, Supply, Installation, QA & Performance Warranty. This was previously our Supply & apply service. SLAB-TECT® is NOT supply only of product, it is an end-to-end service.
PROTECT FROM DAILY WEAR.
Make Burnished Floors Last.
NEED HELP WITH SPECIFICATION?
Get the right TECT spec for your project – talk to our design team today.
NEED HELP WITH SPECIFICATION?
Get the right TECT spec for your project – talk to our design team today.
Do you have a project to quote?
Or need some help specifying our products? Let us know the details of your next project and we’ll get in touch.