CONQOR P10 | ADMIXTURE
Make concrete easier to pump, place & finish.
Concrete flow and placement enhancer designed to improve pumpability, stability, finishing quality and workability across a wide range of concrete mixes.
- Improves pumpability
- Improves flow
- Enhances finishing
CONQOR P10 | ADMIXTURE
CONQOR P10: Concrete pumpability admixture for superior flow & finishing.
CONQOR P10 is a high-performance concrete pumpability admixture that improves stability, cohesion, and finishing quality, especially in demanding placements where consistency matters. CONQOR P10 is engineered using advanced colloidal silica technology to enhance the fresh-state performance of concrete.
CONQOR P10 is suited to a broad range of applications, including long-line pumping, high-rise pours, flatwork, architectural finishes, SCC mixes, and sprayed concrete. CONQOR P10 performs consistently across varying ambient conditions, making it a practical option for contractors working across different sites and seasons.
This makes CONQOR P10 ideal for ready-mix partners wanting more reliable, more workable, and easier-to-place concrete without sacrificing mix stability.
CONQOR P10 | ADMIXTURE
Who it helps.
Ideal Solution for
Concrete Contractors.
CONQOR P10 is suited to a broad range of applications including long-line pumping, high-rise pours, flatwork, architectural finishes, SCC mixes, and sprayed concrete. It performs consistently across varying ambient conditions, making it a practical option for contractors working across different sites and seasons.
Also HELPS
Concrete pump teams.
CONQOR P10 is suited to a broad range of applications including long-line pumping, high-rise pours, flatwork, architectural finishes, SCC mixes, and sprayed concrete. Supports easier pumping through long lines and challenging placements.
USED by
Ready-mix plants.
CONQOR P10 is ideal for ready-mix partners wanting more reliable, more workable, and easier-to-place concrete without sacrificing mix stability.
works for
Construction teams.
CONQOR P10 helps with scheduling, reducing placement delays. CONQOR P10 improves slab finishing quality; and reduces formwork pressure, enabling higher, safer pours.
CONQOR P10 | ADMIXTURE
How it helps.
CONQOR P10 is a high-performance admixture engineered using advanced colloidal silica technology to enhance the fresh-state performance of concrete. It improves stability, cohesion, and finishing quality – especially in demanding placements where consistency matters.
CONQOR P10 | ADMIXTURE
Makes pumping easier
CONQOR P10 is suited to a broad range of applications including long-line pumping, high-rise pours, flatwork, architectural finishes, SCC mixes, and sprayed concrete. Improved pumpability & flow in sticky, harsh, or long-line placement conditions. Acts as an effective pump aid for sprayed concrete / shotcrete.
CONQOR P10 | ADMIXTURE
Improves mix stability
CONQOR P10 stabilises high-slump and SCC mixes while reducing segregation risks.
CONQOR P10 | ADMIXTURE
Working at height
High-rise pour pumping is made easier. CONQOR P10 also reduces formwork pressure, enabling higher, safer pours.
CONQOR P10 | ADMIXTURE
HOW IT WORKS.
CONQOR P10 is a high-performance concrete pumpability admixture designed for superior flow, finishing, and workability control, without compromising mix stability. As a concrete pumpability admixture, CONQOR P10’s technology is based on colloidal silica rheology modification.
MAKING CONCRETE BETTER.
CONQOR P10 | ADMIXTURE
.
CONQOR P10 | ADMIXTURE
Viscosity
CONQOR P10 imparts thixotropic properties, increasing viscosity at rest while enabling excellent flow when pumped, vibrated, or screeded.
CONQOR P10 | ADMIXTURE
Improves stability
CONQOR P10 gives better mix stability, less segregation, lower required slump/spread while maintaining workability, and more consistent finish.
CONQOR P10 | ADMIXTURE
Superior surface closing
Superior surface closing with more consistent finish quality. CONQOR P10 enhances finishability for slabs, flatwork, and architectural applications. Less segregation and lower required slump/spread while maintaining workability. More consistent finishing across a wide range of mix designs.
CONQOR P10 | ADMIXTURE
Limitations
CONQOR P10 is compatible with most supplementary cementitious materials (SCMs) and admixtures. Pre-project trials are recommended to determine the optimal dosage and performance for your specific mix design. If slump/spread loss occurs, adjust using HRWR instead of water.
Working with MARKHAM.
Get in touch with our friendly team to discuss your project needs.
We're making good concrete better. CONQOR P10 is built for the ready-mix industry and precast contractors, who really want concrete to flow where you need it to and stay put when you get it to that point so it finishes nicely.
Doug Hamlin
Research and Development
SUPPLY.
Supply only
CONQOR P10 is available in bulk 1000 litre totes for your convenience. Plumbed-in and recurring supply systems are available for ready-mix plants.
INSTALL.
Project-specific
MARKHAM can supply your CONQOR P10 needs in multiples of totes based on your project-specific needs.
WARRANTY.
Specified, supplied, supported, end to end.
CONQOR P10 may be included in civil infrastructure specifications. The MARKHAM team can delivery and dosing assistance where required.
NEED MORE
PRODUCT INFO?
Download technical data sheets, specification clauses and test reports for CONQOR P10.
Do you have a project to quote?
Send us your mix design and spec for a same-day dose-match and project quote.
Real pours. Real results. Real projects.
NZ Building Product Information Requirements.
TECHNICAL DATA BUILDING PRODUCT INFORMATION: 8/2023.1
Product Identifier:
70/P10
Relevant New Zealand Building Code Clauses:
B1 Structure
How This Product Contributes To Compliance:
CONQOR P10 is a concrete admixture which enhances the flow, pumpability, and placement of fresh concrete. CONQOR P10 improves stability and cohesion, facilitating superior surface closing and finishing. This product is not subject to warning or ban under section 26 of the Building Act 2004.