Water Repellent for Precast, Masonry & Stone.
CONQOR REPEL Spray-on treatment exposed concrete surfaces
WHAT IS CONQOR REPEL?
CONQOR REPEL is a clear, water repellent preservative treatment for concrete and masonry.
CONQOR REPEL is particularly suited for protecting vertical concrete precast walls. CONQOR REPEL Masonry Water Repellent helps preserve & protect the appearance of precast walls and landscaping masonry. CONQOR REPEL is a water-borne water repellent that provides a tough breathing type water barrier beneath and to the surface.
Suitable for a wide range of stone and masonry, including fibre cement products
CONQOR REPEL is a topical water repellant, and does NOT penetrate.
* This product replaces AQURON 1200.
MARKHAM offer CONQOR REPEL by one of the following options:
- PRODUCT SUPPLY 20L or 1000L with Limited Product Warranty
- PROJECT SUPPLY based on total m2’s, training & Warranty Options
- TECT SYSTEMS Supply, installed with Performance Warranty
- Water repellent for vertical concrete
- Preserves natural appearance
How does CONQOR REPEL help your project?
CONQOR REPEL preserves the appearance of natural precast walls in one easy spray-applied application
CONQOR REPEL will protect landscaping masonry from the weather.
CONQOR REPEL SPRAY-ON
PRESERVES NATURAL APPEARANCE
- Preserve the appearance of precast walls
- Does not alter the appearance or texture of the substrate
- Reduced Maintenance
CONQOR REPEL SPRAY-ON
EXTERIOR & UV STABLE
- CONQOR REPEL does not yellow or discolour over time
- Particularly suited for protecting vertical concrete precast walls
CONQOR REPEL SPRAY-ON
PRODUCT OVERVIEW & HOW TO PURCHASE
- MARKHAM offer CONQOR REPEL by one of following options:
- PRODUCT SUPPLY 20L or 1000L with Limited Product warranty
- PROJECT SUPPLY based on total m2’s, training & Warranty Options
- TECT SYSTEMS Supply, installed with Performance Warranty
How CONQOR REPEL Spray-on works
CONQOR REPEL is a water-borne water proofing repellent that provides a tough breathing type water repellence beneath and to the surface.
CONQOR REPEL helps keep surfaces clean while preserving the natural appearance of the masonry and concrete.
CONQOR REPEL SPRAY-ON
see for yourself
CONQOR REPEL is a clear, water repellent preservative treatment designed for sealing and preserving:
- Concrete
- Brick (non-glazed)
- Porous Slate
- Porous natural stone
- Stucco & other masonry
CONQOR REPEL SPRAY-ON
EASY TO APPLY in ONE COAT
- Suited for protecting vertical concrete precast walls
- Low pressure Spray-applied with atomizing spray tip
- Applied in one coat
- Coverage rate of about 6-10 m² per litre, depending on the absorbency of the concrete
- Nil VOC content = 100 % Safe for installers, marine and animal life
Concrete surfaces should be structurally sound and clean of any contaminants or previous coatings that would adversely affect the penetration of CONQOR REPEL.
CONQOR REPEL SPRAY-ON
Apply for TOP DOWN
CONQOR REPEL must be sprayed from the top of the wall, working down in one heavy coat until the substrate looks totally saturated.
- Any runs or ledge puddling must be spread out or whiting may occur
- If CONQOR REPEL is applied over previous applied product, overspray must be removed or ‘whiting’ may occur
CONQOR REPEL SPRAY-ON
Suitable for FIBER CEMENT BOARD.
Suitable for a wide range of stone and masonry, including Fiber Cement products
- Concrete
- Brick (non-glazed)
- Porous Slate
- Porous natural stone
- Stucco & other masonry
NZ Building Product Information Requirements.
TECHNICAL DATA BUILDING PRODUCT INFORMATION: 8/2023.1
Product Identifier:
50/REPEL/20
Relevant New Zealand Building Code Clauses:
B2 Durability
How This Product Contributes To Compliance:
CONQOR REPEL seals precast concrete, with water repellent properties, impeding deterioration and enhancing durability. This product is not subject to warning or ban under section 26 of the Building Act 2004.
CONQOR REPEL SPRAY-ON Details.
MARKHAM offer CONQOR REPEL by one of following options:
- PRODUCT SUPPLY 20L or 1000L with Limited Product warranty
- PROJECT SUPPLY based on total m2’s, training & Warranty Options
- TECT SYSTEMS Supply, installed with Performance Warranty
NEED MORE
PRODUCT INFO?
All the details you need – download a PDF copy of the product information sheet.
Do you have a project to quote?
Or need some help specifying our products? Let us know the details of your next project and we’ll get in touch.